Tag: CesiumJS

Extracting 3D Models From CesiumJS - Part 1: Terrain Map Scraping

This article is part of a series:
  1. Extracting 3D Models From CesiumJS - Part 1: Terrain Map Scraping

CesiumJS is a open source JavaScript framework for rendering 2D and 3D maps - everything from a local area to whole planets - in a web browser using WebGL. In the past few weeks I've been working on obtaining 3D model data in a situation where the only easily available way of accessing the data is through a CesiumJS based viewer. As far as I know, Cesium deals with two different kinds of 3D data: On one side, there's 3D models used for small-scale objects like buildings, on the other side there's terrain maps.

Addressing Terrain Tiles

To get started with the terrain map, I needed to figure out how to obtain terrain data for a certain geographical region. Luckily, this is fairly well documented. CesiumJS uses its own solution called quantized-mesh.

quantized-mesh supports different "zoom levels", for which the whole globe is divided into more and more single "tiles". At level 0, there are only two tiles: the first tile covers the western hemisphere, the second tile covers the eastern hemisphere. With each increase in zoom level, each tile is split into 4, each new tile containing a quadrant of the previous tile. Each tile can then be identified by its zoom level, a x coordinate and a y coordinate. x starts at 0, representing -180° longitude, and when incrementing x, you go eastward until you reach the tile ending at +180° longitude, at x=2^(z+1). y=0 starts at the south pole at -90° latitude, going north, and reaches +90° latitude at y=2^z. No +1 in the exponent here, since for full coverage, x needs to cover the full 360° longitude, while y only needs to cover half as much for a total of 180° latitude.

Using these three variables, z, x and y, the quantized-mesh specification defines an URL template for addressing an individual tile via HTTP:


This can be a little hard to imagine, so I attempted to visualize the first two zoom levels in Figure 1.

Zoom level 0: 2 tiles, each a hemisphere Zoom level 1: 8 tiles, each an octant
Figure 1: Tiles at zoom level 0 and 1: At level 0, there are 2 tiles, each tile covering a hemisphere. At level 1, there are 8 tiles in total. Each tile from level 0 was divided into 4 tiles

If you're familiar with OpenStreetMap, you may recognize this way of dividing the globe into tiles and addressing individual tiles. An OpenStreetMap tile URL looks like this: https://tile.openstreetmap.org/14/8537/5725.png. This similarity is not accidental; in fact, the quantized-mesh tiling schema was designed to follow the Tile Map Service standard's tiling schema.

All of the above assumes our data source uses a WGS84 projection and the TMS tiling schema. quantized-mesh supports other configurations as well, where there is only a single tile at level 0, or with the x and y coordinates swapped. You can find more information in the documentation.

Mapping Geographical Regions to Terrain Tiles

Now that we know how quantized-mesh tiles are addressed, let's find out which tiles we actually need. In my use case, I wanted to obtain all tiles in a bounding box defined by lower and upper latitudes and longitudes. Converting x and y to coordinates is quite easy:

lat = -90 + y * 180 / (2**z)
lon = -180 + x * 180 / (2**z)

So to get the ranges for x and y, we solve those equations for x and y and add proper rounding:

x_min = floor( lon_min * (2**z)/180 + 2**z     )
x_max = ceil(  lon_max * (2**z)/180 + 2**z     )
y_min = floor( lat_min * (2**z)/180 + 2**(z-1) )
y_max = ceil(  lat_max * (2**z)/180 + 2**(z-1) )

The resulting ranges, with x_max and y_max being exclusive upper bounds, are then formulated as

tiles_x = range(x_min, x_max)
tiles_y = range(y_min, y_max)

So once we know at which zoom level our tiles are available, we can compute which tiles to download in order to fully cover our region.

Scraping Terrain Tiles

Now all that's left to to is to figure out how to actually download the individual tiles. Your web browser's inspector can be a great help here. Open the Cesium-based application in your web browser, and open the inspector's network tab. As you move around in the map, you will most likely see a lot of requests, which can be grouped into the following categories:

  • Image tiles, addressed in the same way as the terrain tiles. I didn't need these for my use case, but you should be able to scrape them the same way I'm scraping the terrain tiles.
  • 3D models, with file extensions of b3dm, glb and cmpt. I'll take a look at some of those in later articles.
  • The terrain tiles, with a file extension of terrain. These are the ones we want to obtain.

As you zoom in and out of the map, you'll see that the zoom levels in the requests to image and terrain tiles will increase or decrease. Since I wanted the most detailed tiles, I just continued with the maximal zoom level that was available in the application i was working with.

Now just right click on one of the terrain requests, and navigate to Copy / Copy as cURL. You'll get something like this:

curl 'https://maps.example.com/terrain/tiles/12/12345/12345.terrain' \
  -H 'Origin: https://maps.example.com' \
  -H 'Accept-Encoding: gzip, deflate, br' \
  -H 'User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; ...)' \
  -H 'Accept: application/vnd.quantized-mesh,application/octet-stream;q=0.9' \
  -H 'Referer: https://maps.example.com/' \

At least the Accept header is usually required, and the quantized-mesh specification recommends setting it, especially since it's used to tell the server which extensions to the quantized-mesh standard are supported by the client, if any. Some other headers, especially the Origin, Referer and User-Agent may be required as a "soft form of access control", depending on the server's configuration. I found it worked best to just keep the entire curl request as-is, and only modify the z, x and y parameters in the URL.

Knowing the supported values for z and our ranges for x and y, we can now easily script the download of the individual files. A small hint regarding the filenames: Use all three parameters, z, x and y in the output filename, otherwise you end up overwriting the same files over and over again.

Once the download is done, we are left with a bunch of binary .terrain files. The next article will cover how to parse them.